Details
This is a very easy to use digital light kit. You just need to plug the USB port to suitable 5V power supply, then you would easily to control the light via the mini led controller.
This is very high end led strip. our srips are an easy way to add complex lighting effects to a project. Each LED has an integrated driver that allows you to cotrol the color and brightness of each LED independently. The combined LED/driver IC on these strips is the extremely compact WS812B(essentially an improved WS2811 LED driver integrated directly into a 5050 RGB LED), which enables higher LED densities.
Specification:
LED source: WS2812B LED (5050 SMD RGB LED with built-in improved version of WS2811 IC)
LED Quantity: 30 LEDs/meter
IC Quantity: 30 ICs/meter, the ic is built-in the led, 1 IC drives 1 LED chip
Grey scale: 256 levels
Bits/color: 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel
LED wave lengths: 630nm/530nm/475nm
Cuttable: Strips can be cut apart along the lines between each RGB LED segment to separate them into usable shorter sections
Length of led strip: Pls Choose 1.5 meters or 2 meters
Length of cable of USB port:approx 25cm
Working voltage: DC 5V
Power: 7.2 watt/meter,
PCB width: approx 10mm
PCB Color: Pls Choose White or Black
Protection rate：Pls ChooseNon-Waterproof with 3M Tape on the Back or IP67 Waterproof Outer Casing Silicone without 3M Tape on the Back
Type of controller on this led strip: Pls choose SP002E Mini Controller or SP103E Mini RF Remote Controller
Poer/data connectors on both strip ends for easy chaining, and the input side includes an additional power and ground wire foralternate power connections
Note:This is a special product.the minimum order quantities is 100 sets.and we need approx 7~10 business day to produce.
Package include:
1 set of USB Port 5V WS2812B RGB LED Strip 30ICs/m + SP002E/SP103E Controller
Using the LED strip
Each LED strip has three connection points: the input connector, the auxiliary power wires, and the output connector. These can be seen in the adjacent picture, from left to right: auxiliary power wires, input connector, output connector. The strip uses 3-pin JST SM connectors.
The input connector has three male pins inside of a plastic connector shroud, each separated by about 0.1″. The black wire is ground, the green wire is the signal input, and the red wire is the power line.
The auxiliary power wires are connected to the input side of the LED strip and consist of stripped black and red wires. The black wire is ground, and the red wire is the power line. This provides an alternate (and possibly more convenient) connection point for LED strip power.
The output connector is on the other end of the strip and is designed to mate with the input connector of another LED strip to allow LED strips to be chained. The black wire is ground, the green wire is the signal output, and the red wire is the power line.
All three black ground wires are electrically connected, and all three red power wires are electrically connected.
It is convenient that the power wires are duplicated on the input side because you can connect the auxiliary power wires to your 5 V power supply and then the power will be available on the data input connector and can be used to power the microcontroller that is controlling the LED strip. This means you can power the microcontroller and LED strip from a single supply without having to make branching power connections.
Chaining
Multiple LED strips can be chained together by connecting input connectors to output connectors. When strips are chained this way, they can be controlled and powered as one continuous strip. Please note, however, that as chains get longer, the ends will get dimmer and redder due to the voltage drop across the strip. If this becomes an issue, you can chain the data lines while separately powering shorter subsections of the chain.
We recommend chains of LEDs powered from a single supply not exceed 180 total RGB LEDs. It is fine to make longer chains with connected data lines, but you should power each 180-LED section separately. If you are powering each section from a different power supply, you should cut the power wires between the sections so you do not short the output of two different power supplies together.
Great Choice for Green Eco Lifestyle, CE and RoHS Approved
Processing & Shipping & Tracking
Great Choice for Green Eco Lifestyle, CE and RoHS Approved
Processing & Shipping & Tracking
Mostly the parcel will be shipped within around 1 to 3 business days after payment is received. If you need the items urgently, Pls do contact us for the delivery date right after or before you placed orders. Pls contact sales@canadaledlight.com
Our website is very easy to use, you would place order without register, the shipping fee is based on the weight of the products you ordered. You would easily choose the Shipping Method (UPS/DHL/Fedex/Economic shipping) when you check out, We will always offer the Online Tracking Number to you via Email.
All the products will be packed well for every order, to make sure you will quickly receive all the products at great condition. We weekly supply hundreds of parcels to Canada, USA, UK, France, Germany, Italy, Switzerland, Spain, Sweden and other Europe countries, and we show you the following photos which we took right before we pack the parcels.
Ordering & Payment
We supply our clients with high quality products, quick shipping and professional service, Here are some photos of the Paypal Payments to our account, as you would see, all of the orders has tracking number, and none of them has any problems to be asked for refund or something else, it is a good reference of our products and service: (We covered the name and email to protect the privacy of our clients).
We offer high quality products and service, so a lot of customers become our loyal customers after they first buy, here are some cases for your reference:
We have access to additional products which are not yet listed on this website. If there is something else you need, please email us we will check on its availability and get back to you very soon.
Pls Contact sales@canadaledlight.com We will reply quickly and professionally.
We weekly supply hundreds of parcels to UK, USA, Germany, Denmark, Austria, Canada, France, Spain and other coutries, enjoy good reputation of high quality and quick delivery.
You would always find LED Strips, LED Controllers, LED Power Supply, LED Accessories on Canadaledlight.com
Additional Information
| Weight | 0.1000 |
|---|
Check items to add to the cart or select all
You have no items in your shopping cart.
